READYPLAST M (SUPER)

BENEFITS
1.Pre-mixed and ready to use.
2.Easy to mix, as only water is to be added at site.
3.No water curing is required after application.
4.Eliminates lengthy process of site mixing, transport and storage of all individual materials.
5.It is also economical as quantity of mortar is far less than conventional mortar.
6.Thinner layer of application for lesser shrinkage and seamless structure.
7.Seepage and water percolation through the joints is negligible.
8.Ready for subsequent application like plastering just after 24 hours of application.
9.Raking of joints is not required before plastering.
10.High adhesive strength.
11.Improves overall masonry strength and load bearing capacity.
12.Uniform and consistent quality.
13.High tensile adhesion for good bonding strength.
14.No shrinkage cracks at joints.
15.No curing required post application.
16.Replacement for conventional cement and sand mortar.
17.Thin bed joints and less material consumption.
18.Save substantial cost compared to conventional mortar.
19.Saves time – eliminates lengthy and cumbersome process of site mixing.

Mixing:
1. READYPLAST M (SUPER) is ready for use only precise quantity of water to be added before use.
2.For mixing the material, it is advisable to use mechanical stirrer for uniform mixing.
3.For mixing use a clean vessel/bucket which does not have any hole or cut.
4.Add some water in the empty vessel to ensure no powder gets stuck on the bottom of the vessel and put precise quantity of READYPLAST M (SUPER).
5.Add water in stages to get a smooth, uniform, workable mix.
6.Ensure that no powder is left unmixed at the bottom of the vessel.
7.The jointing mortar is now ready for application